Educational PCB Lab Equipment Training Directional Pulse Hole Metallizing

ZP6108 High Speed Directional Pulse Hole Metallizing PCB Lab Equipment

1. Introduction

Structure

★1. Use high speed pulse power source for plating, supply uniform good quality coating.

★2. Fully ABS engineer plastic machine body and inner

groove, with antiseptic, thermo stability, technology flow is beautiful.

★3. Environment protection black hole technology flow application,
No pollution, it can direct discharge.

★4. Cathode oscillation technology, prevent , concentration gradient, add hole inner liquid flowability.
Technical specification:

★1. With 4 groove structure, with acid-washing, soak conducting resin, activate, electroplating function.

★2. Use transparent flip function, it is easy to observe and storage.

★3. Maximum board: 400×400mm, it can electroplating

5 boards at the same time.

★4. Minimum hole diameter: 0.3mm

★5.Maximum thickness ratio 5:1

★6.Output frequency: 0-2kHz adjustable(it can change as DC power)

★7.Output current: forward direction 0-5A, reverse 0-20A adjustable.

★8.Pulse width: use pulse directional power, forward direction 0-100%, reverse pulse 0 to 100% single adjustable.

9.constantvoltage constant current: current or voltage is constant, with self adjust function, 2 directional current real time display function.

★10.time setting: work time preset function, time remaining display and automatic power off alarm.

★11.LCD:6 inch full color LCD, display all work specification.

12.Circuit protection: with short circuit, open circuit function, supply alarm signal.

Directional PCB Lab Equipment

Metallizing PCB Lab Equipment

PLC Training Equipment

Educational PCB Lab Equipment Training Directional Pulse Hole Metallizing Images